Monitoring and intelligent infrastructure for professional event technology
SmartVT combines power monitoring, WatchDog functions, sensor integration and central system connectivity into a scalable solution for touring, theatres, exhibition construction and professional event infrastructure.
System concept
More than just measuring power
SmartVT is more than a single power monitor. The platform combines load monitoring, condition control, sensor integration and automated responses into a professional infrastructure designed for real-world event operation requirements.
- Suitable for feeder lines, sub-distribution and critical loads
- Scalable from a simple inline monitor to a central overall system
- Designed for touring, theatres, exhibition construction and installations
What SmartVT connects
From measurement data to managed infrastructure
SmartVT brings together energy monitoring, switching logic, sensor technology and central analysis. This turns individual measurement points into a clear, expandable system with defined structure and increased operational reliability.
When critical conditions become visible too late
In complex event setups, loads, voltages or unusual conditions are often only noticed once a problem has already occurred. Additional sensors frequently operate separately, and a central overview is missing.
- Faults are detected or located too late
- Critical loads remain without continuous monitoring
- Sensors and actuators are not cleanly integrated
- There is a lack of central transparency during live operation
One system from measurement to response
SmartVT combines power monitoring, WatchDog functions, sensor integration and central management into a scalable platform. This makes it possible not only to measure conditions, but also to detect them early, network them clearly and process them automatically when required.
- Measure current, voltage, power and additional operating conditions
- Detect thresholds and anomalies in real time
- Connect locally, centrally or via existing infrastructure
- Respond with switching functions, signals and WatchDog logic
Keep critical loads in view
Monitor critical points such as feeder lines, sub-distribution units and especially relevant consumers.
Faster fault detection
Irregularities become visible earlier and can be located and assessed more precisely.
Central system overview
Measurement data, statuses and extensions can be combined in a well-designed infrastructure.
Sensor integration
With DataPorts, additional sensors, actuators and field signals can be integrated systematically.
Automated responses
WatchDog functions enable responses to thresholds or defined events.
Scalable structure
From a compact inline monitor to a central management unit, SmartVT grows with the application.
The SmartVT world at a glance
Four building blocks for one intelligent overall system
Power Monitoring
Inline monitors for current, voltage and power at critical points in the power distribution system.
WatchDog Systems
Monitoring combined with switching and response logic for defined thresholds and operating conditions.
DataPorts & Sensors
Integration of load cells, weather data, distance measurement and additional field information.
Central Management
Aggregation and management within the overall system, for example via RackPort Main.
From Power Monitoring to a Complete Event Infrastructure
With DataPorts and central management units, SmartVT expands pure power monitoring to include sensors, actuators and field integration. This turns individual measurement points into a structured infrastructure for greater visibility, safety and responsiveness.
- Integration of additional sensor sources in the field
- Can be used with robust cabling or, depending on the application, wirelessly as well
- Central management together with RackPort Main possible
- Ideal for growing and complex event setups
Product examples
Typical SmartVT solutions for monitoring, WatchDog and system expansion
The following products illustrate the path from a compact power monitor to WatchDog functions, larger 3-phase solutions and central system extensions.
DataPort
The EtherPortXLR-M is a very compact Ethercon to 4x XLR Female BreakoutBox (Sound: Intput, DMX Output) for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x XLR Male 1:1 (Sound: Input, DMX Output)1x Ethercon through out
DataPort-Load-500-4Set
The EtherPortXLR-M is a very compact Ethercon to 4x XLR Female BreakoutBox (Sound: Intput, DMX Output) for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x XLR Male 1:1 (Sound: Input, DMX Output)1x Ethercon through out
DataPort-Load-500-Set
The EtherPortXLR-M is a very compact Ethercon to 4x XLR Female BreakoutBox (Sound: Intput, DMX Output) for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x XLR Male 1:1 (Sound: Input, DMX Output)1x Ethercon through out
DataPort-SPL-Set
The EtherPortXLR-M is a very compact Ethercon to 4x XLR Female BreakoutBox (Sound: Intput, DMX Output) for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x XLR Male 1:1 (Sound: Input, DMX Output)1x Ethercon through out
DataPort-Temp-Set
The EtherPortXLR-M is a very compact Ethercon to 4x XLR Female BreakoutBox (Sound: Intput, DMX Output) for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x XLR Male 1:1 (Sound: Input, DMX Output)1x Ethercon through out
DataPort-Wind-Set
The EtherPortXLR-M is a very compact Ethercon to 4x XLR Female BreakoutBox (Sound: Intput, DMX Output) for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x XLR Male 1:1 (Sound: Input, DMX Output)1x Ethercon through out
RackPort PD125
RackPort PD125 ist ein125A -3x63ACEE, 3HE single RCBO Powerdistributor. Er setzt auf hochwertige Bestückung, damit nichts dem Zufall oder schlechter Qualität überlassen bleibt, wie z.B. Automaten von ABB: single RCBO (ABB RCBO C63A, 30mA), Original PCE Steckverbinder 3HE (128mm) 3x LED Als Phasenindikator CEE125 In (Flansch)CEE125 Out (Flansch) 3x CEE63 Out, je separater ABBRCBO C63A, 30mA1x PE Anschluss M8 Optionen:1-4 Smartmeter ShellyPro 3EM1m AnschlussleitungCPOT (HAN GND) user manual
RackPort PD125-WD-ARI
Produktpreis je nach Ausführung auf AnfrageDer RackPort PD125-PM-WD ist ein 125A, 3HE single RCBO Watchdog ,zum Einschleifen in bestehende Racks, inklusive kleiner Unterverteilung.Volle remote Kontrolle über Multimeter mit Anzeigen für alle Input und OutputEr setzt auf hochwertige Bestückung, damit nichts dem Zufall oder schlechter Qualität überlassen bleibt, wie z.B. Automaten von ABB: single RCBO (ABB C32A, 30mA, B16/30mA), Original Neutrik, und PCE Steckverbinder CEE125 In & Out (Flansch)ABB Automaten3x CEE32 Out, je separater RCBO C32A, 30mAOptionen: Online Messfunktion ( ShellyPro 3Em ):-keine online Messung-Messung online nur Input-Messung online nur 3x Output-Messung online Input & 3x OutputARI AutoReset (3 Wiedereinschaltversuche) und Remotesteuerung der AutomatenAnzeige Spannung und Strom Input 3PhasenAnzeige Strom 3x Output 3 Phasen1x Ethercon1x PE Anschluss M8Webserver zum Monitoren und KonfigurierenEthernet, Wi-Fi, MQTT, BluetoothWatchdogfunktion bei Grenzwerten Optionen:CPOT (HAN GND)3 Smartmeter ShellyPro 3EM je Output1m Anschlussleitung user manual
RackPort PD32-PM-WD
RackPort PD32-PM-WD ist ein intelligenter und smarter 32A, 3HE single RCBO Powerdistributor.Er bietet volle Kontrolle über Multimeter mit Anzeigen für alle Input und Output Er setzt auf hochwertige Bestückung, damit nichts dem Zufall oder schlechter Qualität überlassen bleibt, wie z.B. Automaten von ABB: single RCBO (ABB B16/30mA), Original Neutrik, und PCE Steckverbinder 1x CEE32 In (Flansch)ABB Automaten2x CEE16 Out, separater RCBO C16A, 30mA 6x PowerconTrue1 Out, je separater RCBO B16A, 30mA Anzeige Spannung und Strom Input 3Phasen Anzeige 4x Strom Output 3 Phasen 1x ShellyPro 3Em (Summe)1x PE Anschluss M8 Optionen: CPOT (HAN GND) 1-5 Smartmeter ShellyPro 3EM 1m Anschlussleitunguser manual
RackPort PD32-PM-WD-x
RackPort PD32-PM-WD-x ist ein intelligenter und smarter 32A, 3HE single RCBO Powerdistributor.Er bietet volle Kontrolle über Multimeter mit Anzeigen für alle Input und Output Er setzt auf hochwertige Bestückung, damit nichts dem Zufall oder schlechter Qualität überlassen bleibt, wie z.B. Automaten von ABB: single RCBO (ABB B16/30mA), Original Neutrik, und PCE Steckverbinder 1x CEE32 In (Flansch)ABB Automaten3x CEE16 Out, separater RCBO C16A, 30mA 3x PowerconTrue1 Out, je separater RCBO B16A, 30mA Anzeige Spannung und Strom Input 3Phasen Anzeige 4x Strom Output 3 Phasen 1x ShellyPro 3Em (Summe)1x PE Anschluss M8 Optionen: CPOT (HAN GND) 1-5 Smartmeter ShellyPro 3EM 1m Anschlussleitunguser manual
RackPort PD63-MC-Han6
Der RackPort PD63-MC-Han6 ist ein 63A 3HE Powerdistributor/Scanstromverteiler mit Servicesteckdose.Er setzt auf hochwertige Bestückung, damit nichts dem Zufall oder schlechter Qualität überlassen bleibt wie z.B. Automaten von ABB: single RCBO (ABB B16/30mA), Original Harting Han6, und PCE Steckverbinder Austattung:CEE63 In (Flansch)ABB Automaten3x Harting Han6 Out, je (3x6) separater B16/30mA RCBO1x Schuko Out, separater B16/30mA RCBO1x PE Anschluss M8 Optionen:CPOT (HAN GND)Smartmeter ShellyPro 3EM1m Anschlussleitung user manual
RackPort PD63-MC-Spx
Der RackPort PD63-MC-Spx ist ein 63A 3HE Powerdistributor/Scanstromverteiler mit Servicesteckdose.Er setzt auf hochwertige Bestückung, damit nichts dem Zufall oder schlechter Qualität überlassen bleibt wie z.B. Automaten von ABB: single RCBO (ABB B16/30mA), Socapex, und PCE Steckverbinder Austattung:CEE63 In (Flansch)ABB Automaten3x Socapex Multipin Out, je (3x6) separater B16/30mA RCBO1x Schuko Out, separater B16/30mA RCBO1x PE Anschluss M8 Optionen:CPOT (HAN GND)Smartmeter ShellyPro 3EM1m Anschlussleitung user manual
RackPort PD63-MC-True1
Der RackPort PD63-MC-True1 ist ein 63A 3HE Powerdistributor/Scanstromverteiler mit Servicesteckdose.Er setzt auf hochwertige Bestückung, damit nichts dem Zufall oder schlechter Qualität überlassen bleibt wie z.B. Automaten von ABB: single RCBO (ABB B16/30mA), Original Neutrik Powercon True1, und PCE Steckverbinder Austattung:CEE63 In (Flansch)ABB Automaten18x PowerconTrue1 Out, je separater B16/30mA RCBO1x Schuko Out, separater B16/30mA RCBO1x PE Anschluss M8 Optionen:CPOT (HAN GND)Smartmeter ShellyPro 3EM1m Anschlussleitung user manual
RackPort PD63-PM-WD
RackPort PD63-PM-WD ist ein intelligenter und smarter 63A, 3HE single RCBO Powerdistributor.Er bietet volle Kontrolle über Multimeter mit Anzeigen für alle Input und Output Er setzt auf hochwertige Bestückung, damit nichts dem Zufall oder schlechter Qualität überlassen bleibt, wie z.B. Automaten von ABB: single RCBO (ABB C32A, 30mA, B16/30mA), Original Neutrik, und PCE Steckverbinder 1x CEE63 In (Flansch)ABB Automaten2x CEE32 Out, je separater RCBO C32A, 30mA 2x CEE16 Out, separater RCBO C16A, 30mAAnzeige Spannung und Strom Input 3Phasen Anzeige 4x Strom Output 3 Phasen 1x ShellyPro 3Em (Summe)1x PE Anschluss M8 Optionen: CPOT (HAN GND) 1-5 Smartmeter ShellyPro 3EM 1m Anschlussleitunguser manual
RackPort PD63-PM-WD-x
RackPort PD63-PM-WD-x ist ein intelligenter und smarter 63A, 3HE single RCBO Powerdistributor.Er bietet volle Kontrolle über Multimeter mit Anzeigen für alle Input und Output Er setzt auf hochwertige Bestückung, damit nichts dem Zufall oder schlechter Qualität überlassen bleibt, wie z.B. Automaten von ABB: single RCBO (ABB C32A, 30mA, B16/30mA), Original Neutrik, und PCE Steckverbinder 1x CEE63 In (Flansch)ABB Automaten2x CEE32 Out, je separater RCBO C32A, 30mA 1x CEE16 Out, separater RCBO C16A, 30mA3x PowerconTrue1 Out, je separater RCBO B16A, 30mAAnzeige Spannung und Strom Input 3Phasen Anzeige 4x Strom Output 3 Phasen 1x ShellyPro 3Em (Summe)1x PE Anschluss M8 Optionen: CPOT (HAN GND) 1-5 Smartmeter ShellyPro 3EM 1m Anschlussleitunguser manual
RackPort100-PM-WD
The RackPortWD63 is an intelligent and smart power monitor for connection to 3-phase 125 amp supply lines.Voltage/current display for looping into 3-phase supply linesonly one height unit (1HE = 4.44cm) Specific features: Measurement of all 3x outer conductorsWatchDog function for limit valuesPower measurement on each channelWeb server for monitoring and configurationEthernet, Wi-Fi, MQTT, Bluetooth...Performance measurement with data storageSmart schedules, scripting, webhooksN-conductor measurement3x digital display voltmeter ammeter, blue for each phaseVoltage measuring range: 60 V to 500 V, measuring accuracy ±1Current measurement: 0 to 100 A, measurement accuracy ±11m cable in/outShelly Pro 3EMOptional: Switching output Connections: 1x Ethernet 1x CEE63-In1x CEE63-Out Documentation: User Manual Technical data:
RackPort125-PM
Der RackPortPM125 ist ein 19" 3HE Powermonitor zum Nachrüsten.Spannung/Strom -Anzeige zum einfachen Einschleifen in 3-phasige Versorgungsstränge, bestehender Verteiler-Racks. 3x Digitalanzeige Voltmeter Amperemeter für jede Phase präzises Smartmeter Voltmeter Amperemeter LCD-Bildschirm mit großem Betrachtungswinkel schaltbare Hintergrundbeleuchtung 1x CEE125-In 1x CEE125-Out simpler 3 Phasen Powermonitor 3HE (128mm) 3x Anzeige Je Phase Strom (0-160 Ampere -+1%) und Spannung (40-500 Volt -+1%) auf einen BlickServicesteckdose mit RCBO (ABB) 1x CEE125 In 1x CEE125 Out zum Einschleifen in bestehende Racks
RackPort125-PM-WD
Der RackPortPM125-PM-WD ist ein 19" 3HE intelligenter smarter Powermonitor zum Einklinken in 3 phasige 125 Ampere Versorgungsstränge bestehender Verteiler-Racks. 3HE (128mm) 3x Spannung/Strom -Anzeige je Phase Strom (0-160 Ampere -+1%) und Spannung (40-500 Volt -+1%) auf einen Blick 1x Sevicesteckdose mit RCBO (ABB B16/30mA) 1x CEE125 In 1x CEE125 Out mit zum Einschleifen in bestehende Racks1x Ethercon Webserver zum Monitoren und Konfigurieren Ethernet, Wi-Fi, MQTT... (Ethernet, Bluetooth optional) Watchdogfunktion bei Grenzwerten Optional: N-Leiter Messunguser manual
RackPort125-PM-WD-Pro
Der RackPortPM125-PM-WD ist ein 19" 3HE Intelligenter hochpräzieser Powermonitor zum Einklinken in 3 phasige 125 Ampere Versorgungsstränge bestehender Verteiler-Racks. Janitza UMG806 mit Ethernetmodul3HE (128mm) 3x Spannung/Strom -Anzeige je Phase Strom (0-160 Ampere -+1%) und Spannung (40-500 Volt -+1%) auf einen Blick 1x Sevicesteckdose mit RCBO (ABB B16/30mA) 1x CEE125 In 1x CEE125 Out mit zum Einschleifen in bestehende Racks1x Ethercon Watchdogfunktion bei Grenzwerten N-Leiter Messunguser manual
RackPort16-PM
The RackPortPM16 is a 19" power monitor for retrofitting.Voltage/current display for easy looping into 3-phase supply lines, existing distribution racks.only one height unit (1U = 4.44cm)Specific features:Rack mounting: Front / Rear / Depth adjustable3x digital display voltmeter ammeter for each phase40-400V/100A precise digital meter voltmeter ammeterLCD screen with wide viewing angleswitchable backlightVoltage measurement range: 40-400V, measurement accuracy: ± 1%Current measurement range: 0-100AStarting current: 0.02A, measurement accuracy: ± 1%1m Cable in/outConnections:1x CEE16-In1x CEE16-OutTechnical data:
RackPort16-PM-WD
The RackPortWD16 is an intelligent and smart power monitor for connecting to 3-phase 125 amp supply lines.Voltage/current display for looping into 3-phase supply linesonly one height unit (1U = 4.44cm) Specific features: Measurement of all 3x external conductorsWatchDog function for limit valuesPower measurement on each channelWeb server for monitoring and configurationEthernet, Wi-Fi, MQTT, Bluetooth...Performance measurement with data storageSmart schedules, scripting, webhooksN conductor measurement3x digital display voltmeter ammeter, blue for each phase Voltage measurement range: 60V to 500V, measurement accuracy ±1Current measurement: 0 to 100 A, measurement accuracy ±11m Cable in/outShelly Pro 3EMOptional: switching output Connections: 1x Ethernet 1x CEE16-In1x CEE16-Out Technical data:
RackPortMain1
RackPortMain1 - Versatile 1U MiniServer for System Monitoring and MoreThe RackPortMain1 is a compact 1U MiniServer, perfect for use as a central unit for Watchdog system monitoring. Featuring a freely configurable Raspberry Pi 5 web server on a Linux basis, it offers countless application possibilities. Use it to display WiFi power monitors, load cells, or any other external applications that respond to threshold exceedances or timers.Thanks to the open operating system and the powerful Raspberry Pi 5, the possibilities are virtually limitless.Key Features:Raspberry Pi 5: Open Linux system as a foundation with pre-installed Docker containersHomeAssistantNode-RedInfluxDBMosquittoExtensive Communication Options: Web server, MQTT, ModBus, HTML, Bluetooth, etc.High Operational Stability: SSD (Solid State Drive) for enhanced stabilityPowerful Hardware:25W power supply via GPIO portInternal 8-port 1Gbit switchVersatile Connectivity:1x Powercon True1 In1x Powercon True1 Out7x Ethernet (6x Front, 1x Rear)3x USB2x HDMI2x Extension ports for custom purposes like DMX or GPIOsTechnical Specifications:ARM Cortex 2.4GHz8GB RAM128GB SSD230VAC, 30WAdditional Resources:Find links to installation scripts and templates here:WatchDog (current, voltage, power, CosPhi…)Load cellsTemperature sensorsWind sensors User-Manual-Rigport-StagePort_de_V0-1User_Manual_WatchDog
RigPort Clamp
The RigPort Clamp is a truss clamp (50mm) for quick fixation of the RigPort line. Two clamps are required per port.Attention: this is not a lifting device, which is why a secondary safety device may be required!not compatible with L1S4 line Technical data:
RigPortL1-PM-WD
The RigPortL1PM is a simple Wi-Fi power monitor with voltage/current display with Powercon connections for looping into 1-phase Powercon supply lines.Specific features:40-400V/100A high precision digital meter voltmeter ammeterLCD screen with wide viewing angleswitchable backlightVoltage measurement range: 40-400VMeasuring accuracy: ± 1%Current measurement range: 0-100AStarting current: 0.02AMeasuring accuracy: ± 1%Wi-Fi measurement of current and voltageShelly Plus PM mini Connections:1x Powercon-In NAC3MPXXA 1x Powercon-Through Out NAC3MPXXBTechnical data:
RigPortL1T1-PM-WD
The RigPortL1T1PM is a simple Wi-Fi power monitor with voltage/current display with Powercon-True1 connections for looping into 1-phase Powercon-True1 supply lines.Specific features:40-400V/100A high precision digital meter voltmeter ammeterLCD screen with wide viewing angleswitchable backlightVoltage measurement range: 40-400VMeasuring accuracy: ± 1%Current measurement range: 0-100AStarting current: 0.02AMeasuring accuracy: ± 1%Wi-Fi measurement of current and voltageShelly Plus PM mini Connections:1x Powercon-T1-In NAC3MPX-TOP 1x Powercon-T1-Through Out NAC3FPX-TOPTechnical data:
RigSwitch8x
The RigSwitch8x is a managed 8-way Ethernet 1GBit distributor for the truss, suitable as a central star distribution for many devices in a confined space. Web managed (IP Address: 192.168.0.1 [admin/admin])1x Powercon-True1-In 1x Powercon-True1-Out 8x Ethercon-Out (with rubber protective cap) IP54 M10 screw mount for attaching couplers, trigger clamps, etc. 2xM4 receptacle for RPL clampsSupport--portbased QOS, quality of service, higher priority traffic experiences less delay than lower priority traffic under congested conditions -IEEE 802.1p Qos ,TOS/DSCP Qos -port trunking/aggregation -rate control, broadcast storm suppression -port flow control -port mirror -IGMP Snooping V1/V2, MLD snooping -IEEE802.1X based port security -loop detection, loop prevention -Dos attack prevention -configure port speed, status -SNMP,web GUI, CLI management -mac list,mac search SPECIFICATIONInterface8*10/100/1000Mbps RJ45 PortsAUTO Negotiation/AUTO MDI/MDIX Standards and ProtocolsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab,IEEE 802.3x, IEEE 802.1q, IEEE 802.1p Network Media10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)EIA/TIA-568 100Ω STP (maximum 100m)100BASE-TX: UTP category 5, 5e cable (maximum 100m)EIA/TIA-568 100Ω STP (maximum 100m)1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)EIA/TIA-568 100Ω STP (maximum 100m)Power ConsumptionMaximum: 4.48W (220V/50Hz)PERFORMANCESwitching CapacityPacket Forwarding Rate16Gbps11.9MppsMAC Address Table4KPacket Buffer Memory1.5MbJumbo Frame15KB SOFTWARE FEATURESQuality of ServiceSupport Port-based/802.1p/DSCP prioritySupport 4 priority queuesRate LimitStorm ControlL2 FeaturesIGMP SnoopingSupports 128 GroupsSupports static link aggregationPort MirroringCable DiagnosticsLoop PreventionVLANSupports up to 32 VLANs simultaneously (out of 4K VLAN IDs)MTU/Port/Tag VLANTransmission MethodStore-And-Forward OTHERSSystem RequirementsMicrosoft® Windows® for running UtilityEnvironmentOperating Temperature: 0℃~40℃ (32℉~104℉)Storage Temperature: -40℃~70℃ (-40℉~158℉)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~90% non-condensing
RPL125-PM
Der RPL125-PM ist ein einfacher Powermonitor zum Einklinken in 3-phasige 125 Ampere Versorgungsstränge. Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge Spezifische Merkmale: Messung aller 3x AußenleiterServicesteckdose Powercon über RCBON-Leitermessung 3x Digitalanzeige Voltmeter Amperemeter, für jede Phase Spannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1 Strommessung: 0 bis 150 A, Messgenauigkeit ±1 2x M10, Safety Ösen Anschlüsse: 1x CEE125-5p Out1x CEE125-5p In1x Powercon (-T1 optional) über RCBO Dokumentation:user manual Technische Daten:
RPL125-PM-WD
Der RPL125-PM-WD ist ein intelligenter Ethernet & Wi-Fi Powermonitor zum Einklinken in 3-phasige 125 Ampere Versorgungsstränge. Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge Spezifische Merkmale: Messung aller 3x Außenleiter WatchDog Funktion bei Grenzwerten Leistungsmessung auf jedem Kanal Webserver zum Monitoren und Konfigurieren Ethernet, Wi-Fi, MQTT, Bluetooth... Leistungsmessung mit Datenspeicherung Intelligente Zeitpläne, Skripting, Webhooks EhternetanschlussServicesteckdose Powercon über RCBON-Leitermessung 3x Digitalanzeige Voltmeter Amperemeter, für jede Phase Spannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1 Strommessung: 0 bis 150 A, Messgenauigkeit ±1 2x M10, Safety Ösen Optional: SchaltausgangShelly Pro 3EMOptional Janitza UMG806 Anschlüsse: 1x CEE125-5p Out1x CEE125-5p In1x Ethercon1x Powercon (-T1 optional) über RCBO Dokumentation:user manual Technische Daten:
RPL125-PM-WD pro
Der RPL125WD pro ist ein intelligenter Powermonitor höchster Präzision, zum Einklinken in 3-phasige 125 Ampere Versorgungsstränge. Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge Spezifische Merkmale: Messung aller 3x Außenleiter WatchDog Funktion bei Grenzwerten Leistungsmessung auf jedem Kanal Webserver zum Monitoren und Konfigurieren Leistungsmessung mit Datenspeicherung Intelligente Zeitpläne, Skripting, Webhooks EhternetanschlussServicesteckdose Powercon über RCBON-Leitermessung Digitalanzeige 2x M10, Safety Ösen Optional: SchaltausgangJanitza UMG806 Anschlüsse: 1x CEE125-5p Out1x CEE125-5p In1x Ethercon1x Powercon T1 über RCBO Dokumentation:user manual Technische Daten:
RPL16-PM
Der RPL16-PM ist ein einfacher Powermonitor. Spannung/Strom -Anzeige zum Einschleifen in 3-phasige 16A Versorgungsstränge Spezifische Merkmale: Digitalanzeige Voltmeter Amperemeter, blau Spannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1 Strommessung: 0 bis 100 A, Messgenauigkeit ±1 CEE Inline kleine wartungsfreie on-Stage Stromverteilungen komplett schwarz für möglichst unauffällige Installation mit RPL-Clamp50 in der Traverse montierbar 1x M10, 2x M4 outdoor-tauglich Anschlüsse: 1x CEE16-5p-In 1x CEE16-5p-Through Out Dokumentation: User-Manual Technische Daten:
RPL16-PM-WD
The RPL16WD is an intelligent Wi-Fi power monitor for connection to 3-phase 16 amp supply lines.Voltage/current display for looping into 3-phase supply linesSpecific features:Measurement of all 3x outer conductorsWatchDog function for limit valuesPower measurement on each channelWeb server for monitoring and configurationWiFi, MQTT, Bluetooth...Performance measurement with data storageSmart schedules, scripting, webhooks3x digital display voltmeter ammeter, blue for each phaseVoltage measuring range: 60 V to 500 V, measuring accuracy ±1Current measurement: 0 to 100 A, measurement accuracy ±1Can be mounted quickly and easily with RigPort RPL-Clamps1x M10, 2x M4Shelly Pro 3EMConnections:1x CEE16-5p-In1x CEE16-5p-Through-Out1x EtherconDocumentation:manual Technical data:
RPL16T1-MKII-WD
The RPL16-MKII is a CEE16, 3-phase power distributor with side outlets. Powercon-T1 taps of all three phases.16A CEE --> Powercon-T1 BreakoutBoxSpecific features:CEE Inlinesmall maintenance-free on-stage power distributionscompletely black for the most inconspicuous installation possibleCan be mounted in the traverse with RPL-Clamp50M10 screw mount for attaching couplers, trigger clamps or similar.2x M4 mountsuitable for outdoor useConnections:1x CEE16-5p-In3x TrueOne-Out1x CEE16-5p-Through OutTechnical data:
RPL32-PM
The RPL32-PM is a simple power monitor.Voltage/current display for looping into 3-phase 32A supply linesSpecific features:Digital display voltmeter ammeter, blueVoltage measurement range: 60V to 500V, measurement accuracy ±1Current measurement: 0 to 100 A, measurement accuracy ±1CEE Inlinesmall maintenance-free on-stage power distributionscompletely black for the most inconspicuous installation possibleCan be mounted in the traverse with RPL-Clamp501x M10, 2x M4suitable for outdoor useConnections:1x CEE32-5p-In1x CEE32-5p-Through OutTechnical data:
RPL32-PM-WD
The RPL32WD is an intelligent Wi-Fi power monitor for connection to 3-phase 32 amp supply lines.Voltage/current display for looping into 3-phase supply linesSpecific features:Measurement of all 3x outer conductorsWatchDog function for limit valuesPower measurement on each channelWeb server for monitoring and configurationWiFi, MQTT, Bluetooth...Performance measurement with data storageSmart schedules, scripting, webhooks3x digital display voltmeter ammeter, blue for each phaseVoltage measuring range: 60 V to 500 V, measuring accuracy ±1Current measurement: 0 to 100 A, measurement accuracy ±1 Can be mounted quickly and easily with RigPort RPL-Clamps1x M10, 2x M4Shelly Pro 3EMConnections:1x CEE32-5p-In1x CEE32-5p-Through-Out1x EtherconDocumentation:manual Technical data:
RPL32T1-MKII-WD
The RPL32-MKII is a CEE32, 3-phase power distributor with side outlets. Powercon-T1 taps of all three phases with respective self-resetting 16A fuse.32A CEE --> Powercon-T1 (self-resetting fused) BreakoutBoxSpecific features:Smallest CEE32 fuse distributor in the worldCEE Inlinesmall maintenance-free on-stage power distributionscompletely black for the most inconspicuous installation possibleCan be mounted in the traverse with RPL-Clamp50M10 screw mount for attaching couplers, trigger clamps or similar.2x M4 mountsuitable for outdoor useConnections:1x CEE32-5p-In3x TrueOne-Out1x CEE32-5p-Through OutTechnical data:
System Add-ons
The right additions for your SmartVT system
From the central management unit to extended sensor integration: these components expand your monitoring setup into a connected system solution.
Developed for real-world demands in event operations
SmartVT is designed for professional applications where visibility, operational reliability and clear structures are essential. The solutions can be used wherever conditions truly matter — from simple power distribution lines to extended infrastructures.
- Practical integration into existing RigPort systems
- Suitable for touring, theatres, exhibition construction and professional installations
- Expandable from single-point measurement to a central overall overview
- Direct support and real-world system expertise
Plan your SmartVT setup
Whether you need a simple power monitor, a WatchDog function or connected sensor integration: discover the right components for your application and gradually expand SmartVT into one intelligent overall system.
FAQ
Frequently asked questions about SmartVT
What applications is SmartVT suitable for?
For touring, theatres, exhibition construction, event infrastructure and anywhere power conditions and additional sensors need to be monitored reliably.
What is the difference between a power monitor and a WatchDog?
A power monitor records and visualises measurement data. WatchDog solutions extend this with response and switching logic for defined conditions or thresholds.
Can SmartVT be managed centrally?
Yes. Depending on the system setup, multiple components can be combined centrally and managed within the system, for example via suitable management units.
What role do DataPorts play?
DataPorts expand SmartVT with additional sensors, actuators and field signals, making it more than just power monitoring.
Is SmartVT also suitable for larger 3-phase systems?
Yes. In addition to compact single-phase solutions, there are also versions for larger and more powerful infrastructures.
Can SmartVT be integrated into existing RigPort systems?
Yes. That is one of its key advantages: monitoring, WatchDog functions and infrastructure extensions can be integrated meaningfully into the RigPort system world.
RackPortMain1 - Versatile 1U MiniServer for System Monitoring and MoreThe RackPortMain1 is a compact 1U MiniServer, perfect for use as a central unit for Watchdog system monitoring. Featuring a freely configurable Raspberry Pi 5 web server on a Linux basis, it offers countless application possibilities. Use it to display WiFi power monitors, load cells, or any other external applications that respond to threshold exceedances or timers.Thanks to the open operating system and the powerful Raspberry Pi 5, the possibilities are virtually limitless.Key Features:Raspberry Pi 5: Open Linux system as a foundation with pre-installed Docker containersHomeAssistantNode-RedInfluxDBMosquittoExtensive Communication Options: Web server, MQTT, ModBus, HTML, Bluetooth, etc.High Operational Stability: SSD (Solid State Drive) for enhanced stabilityPowerful Hardware:25W power supply via GPIO portInternal 8-port 1Gbit switchVersatile Connectivity:1x Powercon True1 In1x Powercon True1 Out7x Ethernet (6x Front, 1x Rear)3x USB2x HDMI2x Extension ports for custom purposes like DMX or GPIOsTechnical Specifications:ARM Cortex 2.4GHz8GB RAM128GB SSD230VAC, 30WAdditional Resources:Find links to installation scripts and templates here:WatchDog (current, voltage, power, CosPhi…)Load cellsTemperature sensorsWind sensors User-Manual-Rigport-StagePort_de_V0-1User_Manual_WatchDog
The EtherPortXLR-M is a very compact Ethercon to 4x XLR Female BreakoutBox (Sound: Intput, DMX Output) for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x XLR Male 1:1 (Sound: Input, DMX Output)1x Ethercon through out
The RPL32WD is an intelligent Wi-Fi power monitor for connection to 3-phase 32 amp supply lines.Voltage/current display for looping into 3-phase supply linesSpecific features:Measurement of all 3x outer conductorsWatchDog function for limit valuesPower measurement on each channelWeb server for monitoring and configurationWiFi, MQTT, Bluetooth...Performance measurement with data storageSmart schedules, scripting, webhooks3x digital display voltmeter ammeter, blue for each phaseVoltage measuring range: 60 V to 500 V, measuring accuracy ±1Current measurement: 0 to 100 A, measurement accuracy ±1 Can be mounted quickly and easily with RigPort RPL-Clamps1x M10, 2x M4Shelly Pro 3EMConnections:1x CEE32-5p-In1x CEE32-5p-Through-Out1x EtherconDocumentation:manual Technical data:
Der RPL63-PM-WD ist ein intelligenter Ethernet & Wi-Fi Powermonitor zum Einklinken in 3-phasige 63 Ampere Versorgungsstränge. Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge Spezifische Merkmale: Messung aller 3x Außenleiter WatchDog Funktion bei Grenzwerten Leistungsmessung auf jedem Kanal Webserver zum Monitoren und Konfigurieren Ethernet, Wi-Fi, MQTT, Bluetooth... Leistungsmessung mit Datenspeicherung Intelligente Zeitpläne, Skripting, Webhooks Ehternetanschluss, Servicesteckdose Powercon über RCBON-Leitermessung optional möglich 3x Digitalanzeige Voltmeter Amperemeter, für jede Phase Spannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1 Strommessung: 0 bis 125 A, Messgenauigkeit ±1 2x M10 Optional: SchaltausgangShelly Pro 3EMOptional Janitza UMG806 Anschlüsse: 1x CEE63-5p Out1x CEE63-5p In1x Ethercon1x Powercon(-T1 optional) über RCBO Dokumentation:user manual Technische Daten:
Das WatchDog_System_Set-63_1 ist ein Energie- Monitoring und Überwachungssystem für kleine Versorgungsnetze mit einem 230/400VAC / 63 Ampere Gesamtwert.Das Set ist ideal um ein eine 63A Zuleitung aufgesplittet auf mehrere Stränge bis zu 4 kritischen Verbrauchern überwacht werden kann.Set bestehend aus: RackPortMain1 als zentrale System Management Einheit zur Erfassung, Darstellung sowie Verarbeitung und Speicherung aller Messwerte zur Automatisierung von Re-/AktionenRackPort63-PM-WD19" 1HE 230/400VAC / 63A / 3 Phasen Messsystem mit Ethernet,Wi-Fi & Bluetooth Schnittstelle zur Online Auswertung2x RPL32-WDMobiles 230/400VAC / 32A / 3 Phasen Messsystem mit Ethernet,Wi-Fi & Bluetooth Schnittstelle zur Online Auswertung 1x RPL16-WDMobiles 230/400VAC / 16A / 3 Phasen Messsystem mit Ethernet,Wi-Fi & Bluetooth Schnittstelle zur Online Auswertung4x RigPortL1T1-PMMobiles 230VAC / 16A / 1 Phasen Messsystem mit Wi-Fi & Bluetooth Schnittstelle zur Online Auswertung Das System ist komplett eingerichtet uns somit sofort einsatzbereit.Erweiterbarkeit um weitere Sensoren und Aktoren in nahezu unbegrenzter Möglichkeit